Call on: +91-9892171042

Carbon Steel ASTM A516 Grade 60, ASTM A516 Grade 60 UNS K02100

Carbon Steel


  • Carbon Steel ASTM A516 Grade 60 is available in strips, sheets, plates, round and square bars, seamless and welded pipes & tubes, Forged & buttweld Fittings, flanges, fastener, flat rolled bars, Wire & valves.

    Carbon Steel ASTM A516 Grade 60 is a slightly higher carbon and manganese content plain carbon steel than 1020. It is used for its somewhat greater strength while still having good ductility.

  • Carbon Steel ASTM A516 Grade 60 Chemical Data


    Carbon 0.17 - 0.23
    Iron Balance
    Manganese 0.7 - 1
    Phosphorus 0.04 max
    Sulphur 0.05 max
    Principal Design Features a516 grade 60 steel is a slightly higher carbon and manganese content plain carbon steel than 1020. It is used for its somewhat greater strength while still having good ductility.
    Carbon Steel ASTM A516 Grade 60 Applications a516 grade 60 steel is typically used for moderate strength structural applications such as cold formed fasteners and bolts. It is often used in the case hardened condition
    Carbon Steel ASTM A516 Grade 60 Machinability Machinability of a516 grade 60 steel is quite good, rating a 70% against the standard 1112 steel of 100% machinability.
    Carbon Steel ASTM A516 Grade 60 Forming a516 grade 60 steel has good ductility and is readily formed by conventional means.
    Carbon Steel ASTM A516 Grade 60 Welding Weldable by all standard methods. However for heavy sections the use of pre-heat and post- heat is advised.
    Carbon Steel ASTM A516 Grade 60 Heat Treatment 1022 may be hardened by heating to 1500 - 1600 F and water quenching. The product should then be tempered. However for a low carbon steel such as this the improvement in strength from heat treat, quench and temper often are not cost effective in terms of the heat treating cost.
    Carbon Steel ASTM A516 Grade 60 Forging Forge at 2350 to 1800 F.
    Carbon Steel ASTM A516 Grade 60 Hot Working Hot work at 900 to 200 F.
    Carbon Steel ASTM A516 Grade 60 Cold Working Cold working by conventional methods is readily accomplished. Following severe cold working an anneal may be required.
    Carbon Steel ASTM A516 Grade 60 Annealing A full anneal is done at 1700 F with slow furnace cooling. A stress relief anneal may be done at 1000 F.
    Carbon Steel ASTM A516 Grade 60 Aging Not applicable.
    Carbon Steel ASTM A516 Grade 60 Tempering Temper, after heat treat and quench, at 600 to 1100 F depending upon strength level wanted.
    Carbon Steel ASTM A516 Grade 60 Hardening Hardens from cold work or by heat treat, quench and temper.

  • Carbon Steel ASTM A516 Grade 60 Physical Data


    Density (lb / cu. in.) 0.284
    Specific Gravity 7.86
    Specific Heat (Btu/lb/Deg F - [32-212 Deg F]) 0.107
    Melting Point (Deg F) 2760
    Poissons Ratio 0.3
    Thermal Conductivity 360
    Mean Coeff Thermal Expansion 6.7
    Modulus of Elasticity Tension 30
    Modulus of Elasticity Torsion 11

  • Searches related to Carbon Steel ASTM A516 Grade 60


    Carbon Steel ASTM A516 Grade 60 Sheets & Plates Carbon Steel ASTM A516 Grade 60 Olets
    Carbon Steel ASTM A516 Grade 60 Globe valves Carbon Steel ASTM A516 Grade 60 Strips & Coils
    Carbon Steel ASTM A516 Grade 60 Nippolets Carbon Steel ASTM A516 Grade 60 Check valves
    Carbon Steel ASTM A516 Grade 60 Round bars Carbon Steel ASTM A516 Grade 60 Sockolet
    Carbon Steel ASTM A516 Grade 60 Ball valves Carbon Steel ASTM A516 Grade 60 Hexagonal Bars
    Carbon Steel ASTM A516 Grade 60 Threadolet Carbon Steel ASTM A516 Grade 60 forged valves
    Carbon Steel ASTM A516 Grade 60 Flat bars Carbon Steel ASTM A516 Grade 60 Union fittings
    Carbon Steel ASTM A516 Grade 60 Butterfly valves Carbon Steel ASTM A516 Grade 60 forged bars
    Carbon Steel ASTM A516 Grade 60 Socket weld fittings Carbon Steel ASTM A516 Grade 60 needle valves
    Carbon Steel ASTM A516 Grade 60 Seamless Pipes Carbon Steel ASTM A516 Grade 60 Forged Threaded fittings
    Carbon Steel ASTM A516 Grade 60 Plug valves Carbon Steel ASTM A516 Grade 60 Welded pipes
    Carbon Steel ASTM A516 Grade 60 Plugs and Bushings Carbon Steel ASTM A516 Grade 60 Bleed valves
    Carbon Steel ASTM A516 Grade 60 Seamless Tubes Carbon Steel ASTM A516 Grade 60 Weld neck flanges
    Carbon Steel ASTM A516 Grade 60 custom valves Carbon Steel ASTM A516 Grade 60 Welded tubes
    Carbon Steel ASTM A516 Grade 60 slip on flanges Carbon Steel ASTM A516 Grade 60 Wires
    Carbon Steel ASTM A516 Grade 60 Large diameter pipe & Tube Carbon Steel ASTM A516 Grade 60 Blind flanges
    Carbon Steel ASTM A516 Grade 60 Reducer Carbon Steel ASTM A516 Grade 60 flanges
    Carbon Steel ASTM A516 Grade 60 Lap joint flanges Carbon Steel ASTM A516 Grade 60 Cap
    Carbon Steel ASTM A516 Grade 60 Valves Carbon Steel ASTM A516 Grade 60 Threaded flanges
    Carbon Steel ASTM A516 Grade 60 Concentric reducer Carbon Steel ASTM A516 Grade 60 forged fittings
    Carbon Steel ASTM A516 Grade 60 large diameter flanges Carbon Steel ASTM A516 Grade 60 Eccentric reducer
    Carbon Steel ASTM A516 Grade 60 Buttweld fittings Carbon Steel ASTM A516 Grade 60 custom flanges
    Carbon Steel ASTM A516 Grade 60 stubend Carbon Steel ASTM A516 Grade 60 Forged components
    Carbon Steel ASTM A516 Grade 60 forged flanges Carbon Steel ASTM A516 Grade 60 blank flanges
    Carbon Steel ASTM A516 Grade 60 CNC components Carbon Steel ASTM A516 Grade 60 buttweld flanges
    Carbon Steel ASTM A516 Grade 60 spectacle flanges Carbon Steel ASTM A516 Grade 60 elbow & tee
    Carbon Steel ASTM A516 Grade 60 plate flanges Carbon Steel ASTM A516 Grade 60 welded flanges
    Carbon Steel ASTM A516 Grade 60 gate valves Carbon Steel ASTM A516 Grade 60 bends
    Carbon Steel ASTM A516 Grade 60 Nipples

  • METALMINISTRY INC. supply Carbon Steel ASTM A516 Grade 60 strips, sheets, plates, round and square bars, seamless and welded pipes & tubes, Forged & buttweld Fittings, flanges, fastener, flat rolled bars, Wire & valves in Agartala ,Agra, Agra Rampur, Ahmedabad, Aizawl, Ajmer, Aligarh, Allahabad, Alwar, Amaravati, Ambala, Ambattur, Ambernath, Amravati, Amritsar, Aurangabad, Bangalore, Bareilly, Belgaum, Bhagalpur, Bhavnagar, Bhilai, Bhiwandi, Bhopal, Bhubaneswar, Bidhannagar, Biharsharif,Bikaner, Bilaspur, Bokaro, Chandigarh, Chennai, Chittoor, Coimbatore, Cuttack, Dahod, Davanegere, Dehradun, Delhi, Dhanbad, Dharamsala, Dindigul, Diu, Durgapur, Erode, Faridabad, Fatehpur, Gandhidham, Gandhinagar, Ghaziabad, Greater Hyderabad, Greater Mumbai, Greater Warangal, Gurgaon, Guwahati, Gwalior, Haldia, Howrah , Hubballi-Dharwad, Hyderabad, Imphal, Indore, Jabalpur, Jaipur, Jalandhar, Jammu, Jamnagar, Jamshedpur, Jhansi, Jodhpur, Junagadh, Kakinada, Kalyan-Dombivali,Kanpur, Karnal , Kavaratti, Kochi, Kohima, Kolhapur, Kolkata, Kota, Lucknow, Ludhiana, Madurai, Mehsana, Mangalore, Mangaluru, Mira-Bhayandar , Moradabad, Morbi, Mumbai, Muzaffarpur, Mysore, Nagpur, Namchi, Nasik, Navi Mumbai, NDMC, Nellore,New Delhi, New Town Kolkata, Noida, Oulgaret, Pali, Panaji, Panipat, Panvel, Pasighat, Patiala, Patna, Pimpri-Chinchwad, Port Blair, Puducherry, Pune, Raipur, Rajkot, Ranchi, Raurkela Industrial Township, Rourkela, Sagar, Salem, Satna, Secunderabad, Shaharanpur, Shillong, Siliguri, Silvassa, Solapur, Srinagar, Surat, Thane, Thanjavur, Thiruvananthapuram, Thoothukudi, Thrissur, Tiruchirapalli, Tirunelveli, Tirupur, Tumkur, Udaipur, Ujjain, Ulhasnagar, Vadodara, Vapi, Varanasi, Vasai-Virar, Vellore , Vishakhapatnam.

    METALMINISTRY INC. Exports Carbon Steel ASTM A516 Grade 60 Strips & Coils to United States of America, Russia, United Kingdom, Kuwait, Qatar, Oman, UAE, Nigeria, Ethiosia, Egypt, Tanzania, Uganda, Algeria, Sudan, Morocco, Angola, Mozambique, Ghana, Cameroon, Cote D`lvoire, Niger, Burkina Faso, Mali, Malawi, Zambia, Senegal, Chad, Somalia, Zimbabwe, Guinea, Rwanda, Benin, Brundi, Tunisia, South Sudan, Togo, Sierra Leone, Libya, Congo, Liberia, Central African Republic, Mauritania, Eritrea, Namibia, Gambia, Botswana, Gabon, Lesotho, Guinea-Bissau, Mauritius, Eswatini, Djibouti, Comoros, Cabo Verde, Seychelles, Reunion, Western Sahara, Mayotte, Saint Helena, Afghanistan, Armenia, Azerbaijan, Bahrain, Bangladesh, Bhutan, Brunei, Cambodia, Cyprus, East Timor, Cyprus, Georgia, Indonesia, Iran, Iraq, Israel, Japan, Kazakhstan, Jordan, Kyrgyzstan, Lebanon, Malaysia, Maldives, Mongolia, Myanmar, Nepal, North Korea, Palestine, Philippines, Saudi Arabia, Singapore, South Korea, Sri Lanka, Syria, Tajikistan, Thailand, Turkey, Taiwan, Uzbekistan, Vietnam, Yemen, Albania, Andorra, Austria, Belarus, Belgium, Bosnia & Herzegovina, Bulgaria, Croatia, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Moldova, Monaco, Montenegro, Norway, Netherlands, Poland, Portugal, Romania, Russia, San Marino, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Ukraine, Vatican City, Antigua & Barbuda, Anguilla, The Bahamas, Barbados, British Virgin Island, Canada, Cayman Island, Costa Rica, Cuba, Dominica, Greenland, Haiti, Jamaica, Martinique, Mexico, Navassa Island, Panama, Puerto Rico, Saint Lucia, Trinidad & Tobago, Argentina, Brazil, Bolivia, Chile, Ecuador, Colombia, Guyana, Paraguay, Peru, Uruguay, Venezuela, Australia, Fiji, Marshall Island, New Zealand, Papua New Guinea, Samoa, Solomon Islands & Tuvalu. .

To buy online, Or get price of Carbon Steel ASTM A516 Grade 60 Strips & Coils send us an email on enquiry@metalministry.in or Call/WhatsApp on +91-9892171042 for quick quote & response. And Strips & Coils are supplied in Relevant standards as per customer requirements & Mill TC from Indian, USA, South African, Russian, German & European Mills only.