Call on: +91-9892171042

Carbon Steel ASTM A3336, ASTM A106 (B) ASTM A234 (WPB) ASTM A333 Grade 6 ASTM A334 Grade 6 ASTM A369 (FPB) ASTM A556 (C2) UNS K03006

Carbon Steel


  • Carbon Steel ASTM A3336 is available in strips, sheets, plates, round and square bars, seamless and welded pipes & tubes, Forged & buttweld Fittings, flanges, fastener, flat rolled bars, Wire & valves.

    Carbon Steel ASTM A3336 is a slightly higher carbon and manganese content plain carbon steel than 1020. It is used for its somewhat greater strength while still having good ductility.

  • Carbon Steel ASTM A3336 Chemical Data


    Carbon 0.17 - 0.23
    Iron Balance
    Manganese 0.7 - 1
    Phosphorus 0.04 max
    Sulphur 0.05 max
    Principal Design Features A3336 is a slightly higher carbon and manganese content plain carbon steel than 1020. It is used for its somewhat greater strength while still having good ductility.
    Carbon Steel ASTM A3336 Applications A3336 is typically used for moderate strength structural applications such as cold formed fasteners and bolts. It is often used in the case hardened condition
    Carbon Steel ASTM A3336 Machinability Machinability of A3336 is quite good, rating a 70% against the standard 1112 steel of 100% machinability.
    Carbon Steel ASTM A3336 Forming A3336 has good ductility and is readily formed by conventional means.
    Carbon Steel ASTM A3336 Welding Weldable by all standard methods. However for heavy sections the use of pre-heat and post- heat is advised.
    Carbon Steel ASTM A3336 Heat Treatment 1022 may be hardened by heating to 1500 - 1600 F and water quenching. The product should then be tempered. However for a low carbon steel such as this the improvement in strength from heat treat, quench and temper often are not cost effective in terms of the heat treating cost.
    Carbon Steel ASTM A3336 Forging Forge at 2350 to 1800 F.
    Carbon Steel ASTM A3336 Hot Working Hot work at 900 to 200 F.
    Carbon Steel ASTM A3336 Cold Working Cold working by conventional methods is readily accomplished. Following severe cold working an anneal may be required.
    Carbon Steel ASTM A3336 Annealing A full anneal is done at 1700 F with slow furnace cooling. A stress relief anneal may be done at 1000 F.
    Carbon Steel ASTM A3336 Aging Not applicable.
    Carbon Steel ASTM A3336 Tempering Temper, after heat treat and quench, at 600 to 1100 F depending upon strength level wanted.
    Carbon Steel ASTM A3336 Hardening Hardens from cold work or by heat treat, quench and temper.

  • Carbon Steel ASTM A3336 Physical Data


    Density (lb / cu. in.) 0.284
    Specific Gravity 7.86
    Specific Heat (Btu/lb/Deg F - [32-212 Deg F]) 0.107
    Melting Point (Deg F) 2760
    Poissons Ratio 0.3
    Thermal Conductivity 360
    Mean Coeff Thermal Expansion 6.7
    Modulus of Elasticity Tension 30
    Modulus of Elasticity Torsion 11

  • Searches related to Carbon Steel ASTM A3336


    Carbon Steel ASTM A3336 Sheets & Plates Carbon Steel ASTM A3336 Olets
    Carbon Steel ASTM A3336 Globe valves Carbon Steel ASTM A3336 Strips & Coils
    Carbon Steel ASTM A3336 Nippolets Carbon Steel ASTM A3336 Check valves
    Carbon Steel ASTM A3336 Round bars Carbon Steel ASTM A3336 Sockolet
    Carbon Steel ASTM A3336 Ball valves Carbon Steel ASTM A3336 Hexagonal Bars
    Carbon Steel ASTM A3336 Threadolet Carbon Steel ASTM A3336 forged valves
    Carbon Steel ASTM A3336 Flat bars Carbon Steel ASTM A3336 Union fittings
    Carbon Steel ASTM A3336 Butterfly valves Carbon Steel ASTM A3336 forged bars
    Carbon Steel ASTM A3336 Socket weld fittings Carbon Steel ASTM A3336 needle valves
    Carbon Steel ASTM A3336 Seamless Pipes Carbon Steel ASTM A3336 Forged Threaded fittings
    Carbon Steel ASTM A3336 Plug valves Carbon Steel ASTM A3336 Welded pipes
    Carbon Steel ASTM A3336 Plugs and Bushings Carbon Steel ASTM A3336 Bleed valves
    Carbon Steel ASTM A3336 Seamless Tubes Carbon Steel ASTM A3336 Weld neck flanges
    Carbon Steel ASTM A3336 custom valves Carbon Steel ASTM A3336 Welded tubes
    Carbon Steel ASTM A3336 slip on flanges Carbon Steel ASTM A3336 Wires
    Carbon Steel ASTM A3336 Large diameter pipe & Tube Carbon Steel ASTM A3336 Blind flanges
    Carbon Steel ASTM A3336 Reducer Carbon Steel ASTM A3336 flanges
    Carbon Steel ASTM A3336 Lap joint flanges Carbon Steel ASTM A3336 Cap
    Carbon Steel ASTM A3336 Valves Carbon Steel ASTM A3336 Threaded flanges
    Carbon Steel ASTM A3336 Concentric reducer Carbon Steel ASTM A3336 forged fittings
    Carbon Steel ASTM A3336 large diameter flanges Carbon Steel ASTM A3336 Eccentric reducer
    Carbon Steel ASTM A3336 Buttweld fittings Carbon Steel ASTM A3336 custom flanges
    Carbon Steel ASTM A3336 stubend Carbon Steel ASTM A3336 Forged components
    Carbon Steel ASTM A3336 forged flanges Carbon Steel ASTM A3336 blank flanges
    Carbon Steel ASTM A3336 CNC components Carbon Steel ASTM A3336 buttweld flanges
    Carbon Steel ASTM A3336 spectacle flanges Carbon Steel ASTM A3336 elbow & tee
    Carbon Steel ASTM A3336 plate flanges Carbon Steel ASTM A3336 welded flanges
    Carbon Steel ASTM A3336 gate valves Carbon Steel ASTM A3336 bends
    Carbon Steel ASTM A3336 Nipples

  • METALMINISTRY INC. supply Carbon Steel ASTM A3336 strips, sheets, plates, round and square bars, seamless and welded pipes & tubes, Forged & buttweld Fittings, flanges, fastener, flat rolled bars, Wire & valves in Agartala ,Agra, Agra Rampur, Ahmedabad, Aizawl, Ajmer, Aligarh, Allahabad, Alwar, Amaravati, Ambala, Ambattur, Ambernath, Amravati, Amritsar, Aurangabad, Bangalore, Bareilly, Belgaum, Bhagalpur, Bhavnagar, Bhilai, Bhiwandi, Bhopal, Bhubaneswar, Bidhannagar, Biharsharif,Bikaner, Bilaspur, Bokaro, Chandigarh, Chennai, Chittoor, Coimbatore, Cuttack, Dahod, Davanegere, Dehradun, Delhi, Dhanbad, Dharamsala, Dindigul, Diu, Durgapur, Erode, Faridabad, Fatehpur, Gandhidham, Gandhinagar, Ghaziabad, Greater Hyderabad, Greater Mumbai, Greater Warangal, Gurgaon, Guwahati, Gwalior, Haldia, Howrah , Hubballi-Dharwad, Hyderabad, Imphal, Indore, Jabalpur, Jaipur, Jalandhar, Jammu, Jamnagar, Jamshedpur, Jhansi, Jodhpur, Junagadh, Kakinada, Kalyan-Dombivali,Kanpur, Karnal , Kavaratti, Kochi, Kohima, Kolhapur, Kolkata, Kota, Lucknow, Ludhiana, Madurai, Mehsana, Mangalore, Mangaluru, Mira-Bhayandar , Moradabad, Morbi, Mumbai, Muzaffarpur, Mysore, Nagpur, Namchi, Nasik, Navi Mumbai, NDMC, Nellore,New Delhi, New Town Kolkata, Noida, Oulgaret, Pali, Panaji, Panipat, Panvel, Pasighat, Patiala, Patna, Pimpri-Chinchwad, Port Blair, Puducherry, Pune, Raipur, Rajkot, Ranchi, Raurkela Industrial Township, Rourkela, Sagar, Salem, Satna, Secunderabad, Shaharanpur, Shillong, Siliguri, Silvassa, Solapur, Srinagar, Surat, Thane, Thanjavur, Thiruvananthapuram, Thoothukudi, Thrissur, Tiruchirapalli, Tirunelveli, Tirupur, Tumkur, Udaipur, Ujjain, Ulhasnagar, Vadodara, Vapi, Varanasi, Vasai-Virar, Vellore , Vishakhapatnam.

    METALMINISTRY INC. Exports Carbon Steel ASTM A3336 Strips & Coils to United States of America, Russia, United Kingdom, Kuwait, Qatar, Oman, UAE, Nigeria, Ethiosia, Egypt, Tanzania, Uganda, Algeria, Sudan, Morocco, Angola, Mozambique, Ghana, Cameroon, Cote D`lvoire, Niger, Burkina Faso, Mali, Malawi, Zambia, Senegal, Chad, Somalia, Zimbabwe, Guinea, Rwanda, Benin, Brundi, Tunisia, South Sudan, Togo, Sierra Leone, Libya, Congo, Liberia, Central African Republic, Mauritania, Eritrea, Namibia, Gambia, Botswana, Gabon, Lesotho, Guinea-Bissau, Mauritius, Eswatini, Djibouti, Comoros, Cabo Verde, Seychelles, Reunion, Western Sahara, Mayotte, Saint Helena, Afghanistan, Armenia, Azerbaijan, Bahrain, Bangladesh, Bhutan, Brunei, Cambodia, Cyprus, East Timor, Cyprus, Georgia, Indonesia, Iran, Iraq, Israel, Japan, Kazakhstan, Jordan, Kyrgyzstan, Lebanon, Malaysia, Maldives, Mongolia, Myanmar, Nepal, North Korea, Palestine, Philippines, Saudi Arabia, Singapore, South Korea, Sri Lanka, Syria, Tajikistan, Thailand, Turkey, Taiwan, Uzbekistan, Vietnam, Yemen, Albania, Andorra, Austria, Belarus, Belgium, Bosnia & Herzegovina, Bulgaria, Croatia, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Moldova, Monaco, Montenegro, Norway, Netherlands, Poland, Portugal, Romania, Russia, San Marino, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Ukraine, Vatican City, Antigua & Barbuda, Anguilla, The Bahamas, Barbados, British Virgin Island, Canada, Cayman Island, Costa Rica, Cuba, Dominica, Greenland, Haiti, Jamaica, Martinique, Mexico, Navassa Island, Panama, Puerto Rico, Saint Lucia, Trinidad & Tobago, Argentina, Brazil, Bolivia, Chile, Ecuador, Colombia, Guyana, Paraguay, Peru, Uruguay, Venezuela, Australia, Fiji, Marshall Island, New Zealand, Papua New Guinea, Samoa, Solomon Islands & Tuvalu. .

To buy online, Or get price of Carbon Steel ASTM A3336 Strips & Coils send us an email on enquiry@metalministry.in or Call/WhatsApp on +91-9892171042 for quick quote & response. And Strips & Coils are supplied in Relevant standards as per customer requirements & Mill TC from Indian, USA, South African, Russian, German & European Mills only.